swirler cyclone repair wear resistant ceramic adhesives

　　The description of our BD131 swirler cyclone repair wear abrasion resistant epoxy ceramic tile adhesives

performance features of our BD131 cyclone repairing wear resistant epoxy bonding ceramic adhesive:
1.Two component,white daub shape,with good water resistance.
2.It's consist of modified toughening resin and composite curing agent.
3.Water resistant,aging resistant,good toughness
4.Can cure at room temperature,can also heat for curing
5.Used in the bonding of swirler wear resistant ceramic lining plate.

product usage of our BD131 chemical abrasion resistant swirler protective ceramic tile bonding epoxy adhesives:
with high bonding strength and good toughness,excellent in water resistance,with very high adhesive strength based on
metal-ceramic bonding,exclusively used in the bonding of swirler wear resistant ceramic lining plate.

How to use of our BD131 cyclone repair special wear impact resistant ceramic epoxy bonding adhesive:
1.Surface treatment: Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,
clean it by cleaning agent in the end.

2.Configure adhesive: According to the specified requirements,make A and B two components mix uniformly,
the mass ratio is A:B=4:1

3.Using adhesive: Make configured adhesive spread coating on the surface of adherend uniformly.

4.Curing: Initial curing at the room temperature for 4 hours,fully curing for 24 hours（12MPa),heat it up to the temperature of 80
degree and keep this temperature for 2 hours,then do the last curing,in this way,it can get the higher combination property
(can improve 30%).The configured adhesive should be used up before initial curing.